|
DOSValve for ALR systems
|
The automatic dosing valve, DOSValve, is software controlled and enables liquids to be metered into an RC1, LabMax® or MultiMax™ reactor automatically. The quantity of reagent, specified in the experiment, can be programmed and precisely added to the reactor.
需要更多信息 需要报价 |
Description
Standard equipment:Solenoid valve with clip and G1/8 connections for tubing;
One dispensing tube and one suction tube, both in FEP with G1/8 connections, UV protected;
LabMax® / Universal Control Box (UCB) connecting cable (2 m) and 1 RD10 connecting cable (2.9 m):
PTFE dosing adapter with standard ground joint ST19/26; with 3 openings and 2 stoppers:
Screw cap with gasket, drying tube with cover;
Operating Instructions.
Features and Benefits
- In the direct control mode, the dosing rate is set approximately by the time the valve remains open. A dosing control loop allows dosing to be set for an exact, specified quantity of liquid over a set period of time. The amount is weighed electronically and accurately added to the mass balance.
- The DOSValve can be used together with a LabMax® , a RC1/RD10, or a MultiMax™/UCB system. In the direct control mode, it accommodates one valve per LabMax and up to three valves per RD10.
- The valve can be used with hazardous liquids because the parts in contact with the dosed liquid are made of PTFE.
